These fragrances have been custom designed with some of the most addictive smells. 

• WEATHER RESISTANT
• MULTI-PURPOSE; CAN BE USED ON THE INTERIOR AND EXTERIOR OF YOUR VEHICLE
• WATER BASED LOW ENVIRONMENTAL IMPACT
• NON-GREASY FINISH
• PROTECTS AND SHINES
• REPELS WATER

Classic Protectant is our emulsified blend of silicones that adds gloss and not only protects, but revives faded plastics. Once dry, this product is weather resistant and offers protection and strong gloss enhancement to exterior plastics, tyres and interior plastics and leather. Classic Protectant is easy to use and was designed to be used neat, however it can be diluted to lower the glossy finish to suit the individual.

Directions -Tyres and engine bay:

1. Spray a light most onto tyres/engine bay.

2. Allow to cure until almost dry.

3. Smooth and even product with a foam applicator.

Directions -Exterior plastic trim:

1. Apply a small amount to a foam applicator and work into plastic areas.

2. Allow to cure until almost dry.

3. Buff with a clean Microfibre cloth to ensure even coverage.

Gregs thoughts:

"At ValetPRO we like to make versatile products and Classic Protectant is exactly that. Classic Protectant will protect and add shine to tyres, plastic, engine bays and interior vinyl with minimal fuss and maximum effectiveness. It’s also great for breathing new life into faded plastic trim." -Managing Director

• Conditions & Protects Leather
• Restores Natural Lustre
• Infuses Leather Scent
• Leaves Natural Finish

Leather Treatment Performance Leather Conditioner & Protectant revives leather and infuses interiors with an intense scent that lasts and lasts. Leather Treatment is the ideal product for reconditioning lifeless weathered automotive leather seats. Due to normal use over time, seats become dry and loose their natural luster. Leather Treatment is a perfect solution to restore leather seats.

servFaces Tyre & Rubber Care

Tyre & Rubber Care provides an even deep black finish on tyre walls and other diverse rubber surfaces. Tyre & Rubber Care is a maintenance and coating emulsion. The product replenishes the moisture of the rubber surface and effectively protects it against scarring and cracking.

Advantages:
– Good water repelling characteristics
– Deep enriched colour
– Quick and easy to use
– Minimal amount of product required for good results
– Does not leave behind an oily or sticky film on the surface
– Free from Silicone
– Free from solvents

Service Life:
Tyre & Rubber Care provides surface protection for a period of 3 – 6 weeks. Note: continuous exposure to rain will reduce the service life.

Application:
Lightly spray the clean surface with the product. Then with a sponge work the product into the surface and leave to dry.

Do not apply the product or leave to dry in direct sunlight.

Usage: 3 – 5 ml / m²
Application Temperature: +5°C to +30°C
Storage and Shelf Life: at least 12 months at room temperature sealed in its original container.
Storage Temperature: +10°C to +25°C

• DESIGNED TO RELEASE GRIME FROM FABRIC QUICKLY
• DILUTES UP TO 1:80
• SMELLS GREAT
• FAST DRYING

Classic Carpet Cleaner is a car interior and upholstery cleaner designed to break down tough soiling whilst lubricating the fabric. This means that dirt slips easily from the fabric which aids the extraction and ultimately reduces the number of passes required to remove the dirt from the carpet. This product is perfect for a quick and thorough clean. The dilution varies: our 500ml trigger spray bottles are already diluted so you just have to spray it on and vacuum it off whilst our 1L and 5L bottles are neat and can be diluted up to 1:20 for trigger use or 1:80 in a carpet extraction machine.

Directions - Carpet Cleaner Machine Use:

1. Dilute product up to 1:80.

2. Apply to fabric, allow to dwell, agitate if necessary.

3. Extract as much liquid as possible from the fabric.

4. Leave to dry.

Please note: Test on an inconspicuous area for colour transfer prior to use.

Directions -Spot Cleaning:

1. Dilute product up to 1:20.

2. Apply to fabric, allow to dwell, agitate if necessary.

3. Dab with a Microfibre cloth to extract liquid.

4. Leave to dry.

Please note: Test on an inconspicuous area for colour transfer prior to use.

Directions -RTU:

1. Apply to fabric, allow to dwell, agitate if necessary.

2. Dab with a Microfibre cloth to extract liquid.

3. Leave to dry.

Please note: Test on an inconspicuous area for colour transfer prior to use.

Gregs thoughts:

"Classic Carpet Cleaner is one of our original products. It works so well that we’ve not changed a single ingredient since day one; it’s simply that good." -Managing Director

• SUITABLE FOR ALL TYPES OF FABRICS
• OUTSTANDING STAIN AND DIRT REPELLENCE
• SIMPLE TO USE
• HELPS EXTEND THE LIFE OF YOUR FABRICS
• ADVANCED HYDROPHOBIC TECHNOLOGY

Fabseal is an easy-to-use protectant for all fabric in your vehicle’s interior. It will leave a thin hydrophobic coating that allows for easy removal of spills from coffee to fizzy drinks. We recommend using Advanced Interior Cleaner   to clean any carpet or upholstery prior to use.

Directions:

1) Lightly dampen a selected area with water for better coverage.

2) Spray product evenly over selected area.

3) Allow to thoroughly dry - ideally overnight.

Please note: Clear away any overspray on undesirable areas.

Greg's thoughts:

"FabSeal protects my vehicles seats and carpet from any stains my children throw at them. A must have!"

servFaces Special Glass Cleaner (High-Concentrate)

servFaces Special Glass Cleaner is a modern and highly concentrated glass cleaner, which is gentle on glass material and provides a streak-free result. The product is also suitable for use on plastic surfaces. The product can be used universally and effortlessly to remove nicotine, grease and oil.

Application Areas:
– Glass facades
– Windows
– Windscreens
– Plastic windows
– Window frames
– Glass tables
– Mirrors
– Acrylic glass

Characteristics:
– Free from Silicone
– Environmentally friendly
– Streak-free cleaning
– Highly concentrated
– Strong cleaning performance
– Economic cleaning, less resources

Application:
Spray the surface with Special Glass Cleaner and using a microfiber cloth remove the dirt. Stubborn dirt can be removed by allowing the Special Glass Cleaner to soak for a while; this will make the cleaning easier.

Dilution:
The product can be diluted in the ratio of 1:10 min. to 1:100 max. depending on the level of contamination.
(Recommendation: 35 – 50ml / 1 Litre of distilled water)

Application Temperature: +10°C to +30°C
Storage and Shelf Life: at least 12 months at room temperature sealed in its original container.
Storage Temperature: +10°C to +25°C

servFaces Glass Cleaner (Ready-to-Use)

servFaces Glass Cleaner is a modern and read-to-use cleaning product, which is gentle on glass material and provides a streak-free result. The product is also suitable for use on plastic surfaces. The product can be used universally and effortlessly to remove nicotine, grease and oil.

Application Areas:
– Glass facades and windows
– Windscreens
– Plastic windows
– Window frames
– Glass tables and Mirrors

Characteristics:
– Free from Silicone
– Environmentally friendly
– Streak-free cleaning
– Highly concentrated
– Strong cleaning performance
– Economic cleaning, less resources

Application:
Spray the surface with Glass Cleaner and using a microfiber cloth remove the dirt. Stubborn dirt can be removed by allowing the Glass Cleaner to soak for a while; this will make the cleaning easier.
Recommendation: for an optimal result use servFaces Glass Cleaning Towels.

Do not apply the product or leave to dry in direct sunlight.

Usage: 5 – 10 ml / m²
Application Temperature: +5°C to +30°C
Storage and Shelf Life: at least 12 months at room temperature sealed in its original container.
Storage Temperature: +10°C to +25°C

servFaces Cockpit & Plastic Care (Interior)

Cockpit and Plastic Care provides a uniformly deep black finish on various plastic surfaces in the interior. Cockpit and Plastic Care is a maintenance and protective emulsion. The product replenishes the moisture of the plastic surface and effectively protects the surface from discoloration and cracking. Cockpit and Plastic Care produces a silky looking, well-groomed finish and is particularly suitable for so called “Soft Touch” surfaces in modern vehicle interiors. The product also provides dust repellent and antistatic characteristics. This helps to protect the plastic from further contamination since the surface does not become sticky / adhesive.

Advantages:
– UV protection
– Antistatic coating
– Supple feel
– Improved depth of surface colour
– Quick and easy to use
– Minimal amount of product required for excellent results
– Free from solvents
– Free from Silicone

Service Life:
Cockpit & Plastic Care provides surface protection for a period of 6 – 12 weeks. After application and with regular cleaning intervals the surface protection can last for up to 6 months.

Application:
Lightly spray the cleaned surface with the product and work in using a sponge, then allow the surface to dry.

Do not use the product in direct sunlight.

Usage: 3 – 5 ml / m²
Application Temperature: +5°C to +30°C
Storage and Shelf Life: at least 12 months at room temperature sealed in its original container.
Storage Temperature: +10°C to +25°C