Known as "One of the world's most effective wheel cleaner"... 

What is it?

A pH neutral wheel cleaner.

How Does it Work?

Dragons Breath reacts with the iron contamination found in brake dust.  This chemical reaction turns iron in to a water soluble solution making it easy to rinse away baked on brake dust. Combined with good cleaning detergents this cleaner easily clean general road grime without agitation. Baked on Brake dust of course still requires agitation.

Benefits?

pH neutral and safe to be used on polished rim.

Dilution ration?

Designed to be used neat.

• REMOVES BUG SPLATS
• ALL PURPOSE CLEANER
• PLEASANT CITRUS SMELL
• CLEANS ALL SURFACES
• DOES NOT REMOVE WAX LAYERS

Citrus Pre Wash is a product to be used prior to shampooing your car; it removes excess dirt like bug splats and general road grime in order to prep the car for washing. The most common method is to apply it via pump spray to the bottom seals of the vehicle and under the wheels where it penetrates the grime and enables you to easily rinse it off. This product is designed to minimise the breakdown of waxes and sealants. The citrus oils enable great grime penetration, allowing it to be an exceptionally effective cleaner.

Directions:

1. Dilute 1:8.

2. Spray all the lower panels of the vehicle.

3. Leave to dwell but not dry out.

4. Starting from the bottom, rinse off with a pressure washer.

Gregs thoughts:

"Citrus Pre Wash is a great and versatile product that cleans both the interior and exterior of your vehicle effectively. With a mildly alkaline pH value of 9.5, Citrus Pre Wash provides powerful yet safe cleaning power with impressive dilution ratios. A first rate product we are more than proud of." -Managing Director

Description

• HIGHLY DURABLE BRISTLES
• GREAT FOR AGITATING WHEEL CLEANERS
• HELPS SHIFT BRAKE DUST AND GRIME

Just like our wooden handle version this has highly durable bristles. These are great for gently agitating wheels with strong chemicals.

• TRIM AND TYRE DRESSING
• REVIVES FADED PLASTICS
• LEAVES A HYPER BEADING FINISH
• HIGH QUALITY FINISH

Black To The Future is a trim and tyre dressing in the form of a thick gel. It uses fortified polymers to restore and protect tyres and plastic trim for months at a time, regardless of weather. It revives faded plastics and holds the restored colour. It is designed to be used neat and can be applied to tyres for a show finish.

Directions:

1) Apply using a Wax Applicator.

2) Spread evenly.

3) Allow to cure for 5-10 minutes.

4) Buff off any remaining residue.

5) Repeat if needed.

• HIGH PERFORMANCE PH NEUTRAL SNOW FOAM
• CLINGS TO THE PAINTWORK EXCEPTIONALLY WELL & EFFECTIVE AT LOOSENING DIRT AND ROAD GRIME
• LUXURIOUSLY THICK FOAM
• WAX SAFE FORMULATION

Foamula 1 is a high-performance pH neutral snow foam that provides true versatility to any vehicle prewash. The concentrated formula provides an ultra-thick foam while still giving fantastic cleaning power at lower dilutions. It can be used with a foam lance or pump sprayer and gives off a pleasant apple fragrance during use. This wax safe product will provide impressive cling giving it ample time to encapsulate dirt and grime on the vehicle surface to allow easy removal during the rinse the stage.

Directions:

1) Add 300ml of snow foam and 700ml of water to a 1L foam lance bottle.

2) Adjust the feed rate to suit the level of foam required for the job at hand.

3) Foam the entire exterior of the vehicle, including the wheels, glass and trim.

4) Allow to dwell for five minutes, then rinse off thoroughly with a pressure washer.

Alternative pump spray dilution: 1:5 (heavily soiled wheels) to 1:20 (light dirt) depending on the task at hand. Agitate if required, then rinse thoroughly.

Please note: Do not allow the product to dry on paintwork. Avoid using in direct sunlight if possible.

Gregs thoughts:

"Snow foams are essential in ensuring the shampoo stage of your wash does not lead to excessive scratching from any road or traffic film that may be on the vehicle. Foamula 1 is specially formulated to provide strong clinging performance allowing for the foam to have plenty of time to loosen dirt from your vehicle’s exterior. This has quickly become my go-to snow foam during the winter months."

• REMOVES GRIME, WAX OR STAINS FROM YOUR MICROFIBRE CLOTHS
• NO ADDED SOFTENERS OR BRIGHTENERS
• REVIVES YOUR MICROFIBRE CLOTHS FOR EFFECTIVE USE
• USES NATURAL AND BIODEGRADABLE CLEANING TECHNOLOGY

Microfibre Reviver has been designed to handle the dirt and grime of any car preparation, decontamination or detailing work to leave any microfibre cloth or towel ready for repeated use. The unique formulation is effective but, unlike regular detergents, is not aggressive, leaving the microfibre towel revived and effective wash after wash. This product has been tried and tested with all the microfibre based items you can find in our accessories range.

Directions:

1. Place in a washing machine with microfibre cloths.  Light load: 40ml. Heavy load: 80ml.

2. Start the wash.  Do not exceed 40 ̊C.

3. After washing, allow the cloths to air dry.

Please note:  Do not use fabric softeners or any added powder detergents and bleach. Do not tumble dry microfibre cloths

Greg's thoughts:

"At ValetPRO we get through a lot of microfibre cloths and towels when improving our existing range and developing new products that we are excited to release to our customers. Microfibre Reviver has become an important asset that ensures our microfibres remain at a high quality for longer. This is a product we know our customers will love." - Managing Director

As the name suggests, our Maximum Cut Polishing Pad is the first choice for heavy polishing tasks; if you need a pad with a little more bite than this is the one for you. 

• DESIGNED TO FIT A DUAL ACTION POLISHER
• PROVIDES ULTRA HIGH GLOSS AND CUT
• 5.5 INCH VELCRO BACKING
• HELPS REMOVE SCRATCHES AND SWIRL MARKS
• THIN LAYERS OF MICROFIBRE FOR QUICK EFFECT

As the name suggests, our Light-Medium Polishing Pad is the first choice for lighter polishing tasks; this pad is perfect for cars with softer paint.

• DESIGNED TO FIT A DUAL ACTION POLISHER
• PROVIDES ULTRA HIGH GLOSS 
• 5.5 INCH VELCRO BACKING
• HELPS REMOVE LIGHT SCRATCHES AND FINISH POLISHING 

• WEATHER RESISTANT
• MULTI-PURPOSE; CAN BE USED ON THE INTERIOR AND EXTERIOR OF YOUR VEHICLE
• WATER BASED LOW ENVIRONMENTAL IMPACT
• NON-GREASY FINISH
• PROTECTS AND SHINES
• REPELS WATER

Classic Protectant is our emulsified blend of silicones that adds gloss and not only protects, but revives faded plastics. Once dry, this product is weather resistant and offers protection and strong gloss enhancement to exterior plastics, tyres and interior plastics and leather. Classic Protectant is easy to use and was designed to be used neat, however it can be diluted to lower the glossy finish to suit the individual.

Directions -Tyres and engine bay:

1. Spray a light most onto tyres/engine bay.

2. Allow to cure until almost dry.

3. Smooth and even product with a foam applicator.

Directions -Exterior plastic trim:

1. Apply a small amount to a foam applicator and work into plastic areas.

2. Allow to cure until almost dry.

3. Buff with a clean Microfibre cloth to ensure even coverage.

Gregs thoughts:

"At ValetPRO we like to make versatile products and Classic Protectant is exactly that. Classic Protectant will protect and add shine to tyres, plastic, engine bays and interior vinyl with minimal fuss and maximum effectiveness. It’s also great for breathing new life into faded plastic trim." -Managing Director

• UNIQUELY DESIGNED TO BE USED WITH A FOAM LANCE

• PROVIDES A HIGH GLOSS FINISH TO YOUR VEHICLE

• PROVIDES HYDROPHOBIC PROTECTION FOR IMPRESSIVE WATER BEADING

• EXCEPTIONALLY EASY TO APPLY AND RINSE OFF

• PH NEUTRAL FORMULATION

ValetPRO Snow Seal is a specially formulated coating to be used with a foam lance and pressure washer. Snow Seal awards your vehicle with a durable hydrophobic coating that leads to remarkable water beading. Application could not be easier– simply spray on a clean vehicle at the specified dilution, rinse off and then dry. Snow Seal will also leave an impressive glossy finish.

Directions:

1) Before application, ensure the vehicle is out of direct sunlight and paintwork is clean and cool to the touch.

2) Dilute in a clean foam lance bottle. 50ml product: 250ml water.

3) Apply to the vehicle. Take care to avoid the windscreen.

4) Rinse the vehicle with a pressure washer. Do not allow product to dry.

5) Dry the vehicle with a ValetPRO Drying Towel.

6) Clean the windscreen and wiper blades with Glass Cleaner to avoid potential smearing.

Please note: No cure time or agitation required. Do not exceed dilution ratio. Not suitable for use on convertible vehicles.

Greg's thoughts:

"Snow Seal is the perfect accompaniment to anyone who uses a pressure washer and foam lance as a part of their car detailing process. Ideal for the wintertime or those in an outdoor setting, Snow Seal saves time and effort to your car protection step."

• REMOVES TAR AND GLUE FROM HARD AND PAINTED SURFACES
• MILD BUT EFFECTIVE SOLVENT
• REFINED ALIPHATIC SOLVENT BOOSTED WITH NATURAL CITRUS OIL

Citrus Tar and Glue Remover does exactly what the name describes; it was designed to shift sticky substances from hard and painted surfaces. It’s a refined aliphatic solvent boosted with natural citrus oils, designed to be mild but highly effective in turning tar and glue soluble. This product was designed to be used neat and makes for a gentle tar and glue remover.

Directions:

1. Spray onto affected area, working a panel at a time. Always use on a dry surface.

2. Allow to dwell until tar begins to run.

3. Prime a microfiber cloth with product.

4. Wipe off treated area.

5. Repeat until the contamination is removed.

6. Rinse down the paintwork with water to neutralise the solvents.

Please note: If the vehicle has been repainted or had a SMART repair carry out a spot test on an inconspicuous area.

Gregs thoughts:

"Many trade specific products can be quite unpleasant to use and tar and glue removers are right up there with the worst culprits. Our aim with Citrus Tar And Glue Remover was to create a product that was simple yet still effective. Using natural citrus oil ValetPRO’s Citrus Tar and Glue remover works brilliantly." -Managing Director

What is it?

Glass Cleaner

How Does it Work?

Simply spray on glass it brakes down soiling, birds muck, bug splats, cigarette and general grime easily.

Benefits?

excellent first time wipe success. Quick and easy glass cleaner

Dilution ration?

Use neat.

• 50 X 80CM
• EXTREMELY ABSORBENT AND EASY TO WRING OUT
• GSM: 460

These are extremely absorbent towels which can be used to dry large areas quickly and they won’t scratch your paintwork. Larger and thicker drying towels are often too difficult to wring out once water logged. Our Drying Towels have been designed specifically with this problem in mind and have been created to enable easy wringing and quick reuse of the towel, making it an essential item for any car care enthusiast.

• 50CM X 80CM
• PLUSH, SOFT DRYING TOWEL
• VERY ABSORBENT

Our green Drying Towel is an excellent choice for making quick work of drying your vehicle due to its super absorbent capabilities and plushness.

• CLEAN AROUND PEDALS, BETWEEN SEATS AND DOORS
• UNIQUE LONG BRISTLES
• HARD WEARING, LONG LASTING

This brush is a practical addition to your upholstery arsenal. Most upholstery brushes are difficult or impossible to use around pedals and between seats and doors; this thin design and the unique long bristles agitate these hard to reach areas perfectly. The bristle are hard wearing and the length and thickness are also perfect for agitating seats and carpets. (For head lining we recommend using our Leather Brush as this is much softer for this delicate surface).

• SOFT NYLON BRISTLES
• WON'T SCRATCH LEATHER
• AGITATE BETWEEN LEATHER GRAIN

This is a lovely brush; these soft nylon bristles are fine enough to agitate leather grain whilst soft enough not to scratch the surface. Customers have reported to use this brush on head lining and convertible hoods.

• GENTLY APPLY PRODUCT TO SURFACES
• ENSURE SMOOTH AND EVEN APPLICATION
• REACH SMALL, DIFFICULT TO CLEAN AREAS

These are amazingly useful brushes, great for applying cleaners to air vents and applying dressing to plastic trim accurately.

• CHEMICAL RESISTANT BRISTLES
• GREAT FOR CLEANING SPOKES
• LONG LASTING

Using our chemical resistant blue bristles we have created a soft and effective spoke wheel brush perfect for cleaning between spokes and the backs of the wheel area.

• DESIGNED TO RELEASE GRIME FROM FABRIC QUICKLY
• DILUTES UP TO 1:80
• SMELLS GREAT
• FAST DRYING

Classic Carpet Cleaner is a car interior and upholstery cleaner designed to break down tough soiling whilst lubricating the fabric. This means that dirt slips easily from the fabric which aids the extraction and ultimately reduces the number of passes required to remove the dirt from the carpet. This product is perfect for a quick and thorough clean. The dilution varies: our 500ml trigger spray bottles are already diluted so you just have to spray it on and vacuum it off whilst our 1L and 5L bottles are neat and can be diluted up to 1:20 for trigger use or 1:80 in a carpet extraction machine.

Directions - Carpet Cleaner Machine Use:

1. Dilute product up to 1:80.

2. Apply to fabric, allow to dwell, agitate if necessary.

3. Extract as much liquid as possible from the fabric.

4. Leave to dry.

Please note: Test on an inconspicuous area for colour transfer prior to use.

Directions -Spot Cleaning:

1. Dilute product up to 1:20.

2. Apply to fabric, allow to dwell, agitate if necessary.

3. Dab with a Microfibre cloth to extract liquid.

4. Leave to dry.

Please note: Test on an inconspicuous area for colour transfer prior to use.

Directions -RTU:

1. Apply to fabric, allow to dwell, agitate if necessary.

2. Dab with a Microfibre cloth to extract liquid.

3. Leave to dry.

Please note: Test on an inconspicuous area for colour transfer prior to use.

Gregs thoughts:

"Classic Carpet Cleaner is one of our original products. It works so well that we’ve not changed a single ingredient since day one; it’s simply that good." -Managing Director

• POWERFUL YET GENTLE CAR SHAMPOO THAT RINSES OFF EASILY
• LEAVES A HIGH GLOSS, WATER REPELLING FINISH
• IMPROVES DRYING TIME
• PROLONG WAXES AND PAINT SEALANT LIFE BY ADDING A SACRIFICIAL, HIGH GLOSS COATING
• WASH SPONGE OR HAND MITT WILL GLIDE OVER PAINT WORK

Advanced Poseidon Car Wash uses a special blend of anionic surfactants and polymers to remove dirt with ease whilst leaving a protective gloss enhancing  film behind when rinsed off. This sacrificial layer allows for a clean finish whilst prolonging the protection of your wax or sealant.

Directions:

1. Dilute 30ml:5L of water in a bucket.

2. Working from the top down, apply to a wet vehicle with a  Advanced Microfibre Wash Mitt.

3. Wash entire vehicle.

4. Rinse off the vehicle, working from the top down.

5. Dry the vehicle using a Drying Towel.

Gregs thoughts:

"Thank you for your interest in Advanced Poseidon Car Wash. We are over the moon with this product’s performance having eliminated some of the drawbacks associated with traditional wash and wax products, like weak cleaning ability.  We have created a powerful but gentle car shampoo that’s designed to maintain your car wax or paint sealant, proving a glossy protective barrier. This is our finest and best car shampoo we have ever made." -Managing Director

• COMFORTABLE, MANOEUVRABLE AND EASY TO USE
• 30CM X 18CM X 3CM
• PROFESSIONAL CHENILLE WASH MITT
• HARDWEARING, LONG LASTING AND SUPER ABSORBANT

• SUITABLE FOR ALL TYPES OF FABRICS
• OUTSTANDING STAIN AND DIRT REPELLENCE
• SIMPLE TO USE
• HELPS EXTEND THE LIFE OF YOUR FABRICS
• ADVANCED HYDROPHOBIC TECHNOLOGY

Fabseal is an easy-to-use protectant for all fabric in your vehicle’s interior. It will leave a thin hydrophobic coating that allows for easy removal of spills from coffee to fizzy drinks. We recommend using Advanced Interior Cleaner   to clean any carpet or upholstery prior to use.

Directions:

1) Lightly dampen a selected area with water for better coverage.

2) Spray product evenly over selected area.

3) Allow to thoroughly dry - ideally overnight.

Please note: Clear away any overspray on undesirable areas.

Greg's thoughts:

"FabSeal protects my vehicles seats and carpet from any stains my children throw at them. A must have!"

ValetPRO 1L Spray Bottle

The ValetPRO 1L Spray Bottle is an empty bottle complete with an adjustable chemical resistant trigger - available to store and dispense all of your favourite detailing products.

Great for diluting different products for different purposes and excellent value for money. Comes with a label to write down product and dilution. Works well with ValetPRO Dragons Breath.

QTY: 1L Spray Bottle + Trigger