Known as "One of the world's most effective wheel cleaner"... 

What is it?

A pH neutral wheel cleaner.

How Does it Work?

Dragons Breath reacts with the iron contamination found in brake dust.  This chemical reaction turns iron in to a water soluble solution making it easy to rinse away baked on brake dust. Combined with good cleaning detergents this cleaner easily clean general road grime without agitation. Baked on Brake dust of course still requires agitation.

Benefits?

pH neutral and safe to be used on polished rim.

Dilution ration?

Designed to be used neat.

DIRT LOCK - CAR WASH BUCKET INSERT

*ALL DIRT LOCKS COME EQUIPPED WITH RUBBER GRIPS*

Filters nearly 100% of your wash water!

KEY FEATURES:

• Powered by the pulse of your hand
• Jet turbine design speeds up debris, rushing it to the bottom of the bucket
• Venturi funnels squeeze water and debris underneath the screen
• Flexible rubber tabs allow for the perfect fit in nearly any round bucket
• Fresh water return troughs allow only clean water to pass above 
• Chemical & crush resistant
• Automatically cleans your wash mitt and tools when you dunk your glove in the bucket
• Rinse & re-use 

Our patented design utilizes the motion of your hand to engage the Dirt Lock's turbine induction system. Once you pulse your hand in the bucket, the water is dramatically sped up by the shape of the jet turbine. The dirt is then cycled through hundreds of tapered Venturi funnels and is further sped up again. This shoots the debris underneath the screen and out of harms way, without a way to re-enter the clean water. Any small particles that made it through the openings hit the tumbler system and are pushed back down to the bottom of the bucket. In short, every time you pump your hand in the bucket you are cycling the dirt underneath the screen and replenishing it with reusable clean water.

ONE Dirt Lock will filter your wash water like you have never seen before. Protect your car and eliminate the main cause of swirl marks on your paintwork!

Made In Canada      

• Easy to use
• Spray on, wipe off - quick detail spray wax
• Restores the deep, wet-looking shine
• Quick shine and protection between waxes
  
• Safe on clear coat and fresh paint
• Will not leave wax build-up on rubber or vinyl
• Leaves an invisible protective barrier
• Great for maintaining already waxes surfaces
• Gloss enhancer, wax and sealant booster

About SmartDetail
SmartDetail provides an unparalleled difference you can truly see, a protective coat that lasts and a shine great enough to make anyone smile.SmartDetail restores that just-waxed deep wet looking shine in minutes! The specialized ingredients in this high lubricity spray wax deliver an unparalleled level of surface clarity, intensity and shine. The slick wet look comes from a unique polymer-resin based formula combined with acrylic wetting agents to truly enhance any color finish. The anti-static technology will reduce the static charge that attracts dust while also removing any unsightly fingerprints and smudges.

• REMOVES BUG SPLATS
• ALL PURPOSE CLEANER
• PLEASANT CITRUS SMELL
• CLEANS ALL SURFACES
• DOES NOT REMOVE WAX LAYERS

Citrus Pre Wash is a product to be used prior to shampooing your car; it removes excess dirt like bug splats and general road grime in order to prep the car for washing. The most common method is to apply it via pump spray to the bottom seals of the vehicle and under the wheels where it penetrates the grime and enables you to easily rinse it off. This product is designed to minimise the breakdown of waxes and sealants. The citrus oils enable great grime penetration, allowing it to be an exceptionally effective cleaner.

Directions:

1. Dilute 1:8.

2. Spray all the lower panels of the vehicle.

3. Leave to dwell but not dry out.

4. Starting from the bottom, rinse off with a pressure washer.

Gregs thoughts:

"Citrus Pre Wash is a great and versatile product that cleans both the interior and exterior of your vehicle effectively. With a mildly alkaline pH value of 9.5, Citrus Pre Wash provides powerful yet safe cleaning power with impressive dilution ratios. A first rate product we are more than proud of." -Managing Director

• TRIM AND TYRE DRESSING
• REVIVES FADED PLASTICS
• LEAVES A HYPER BEADING FINISH
• HIGH QUALITY FINISH

Black To The Future is a trim and tyre dressing in the form of a thick gel. It uses fortified polymers to restore and protect tyres and plastic trim for months at a time, regardless of weather. It revives faded plastics and holds the restored colour. It is designed to be used neat and can be applied to tyres for a show finish.

Directions:

1) Apply using a Wax Applicator.

2) Spread evenly.

3) Allow to cure for 5-10 minutes.

4) Buff off any remaining residue.

5) Repeat if needed.

Size:- 22cm x 25cm
Color:- Platinum Grey / Charcoal Grey
Blend:- 70% Polyester / 30% Polyamide
Material Weight:- Varies From 490 – 550 GSM (Grams per Square Meter)
Border / Edging:- ButterSoft Microfiber Suede Border
Material:- 100% Korean Split Microfiber
Country of Origin:- South Korea

Recommended Uses:

• Drying & Buffing – Lower Panels, Door Jambs, and Hard to Reach Areas
• Easy Application of Sealants, Instant Detailing Sprays, Spray Wax & Other Drying Aids
• Quick Touch-Up of Smaller Areas
• Partner With Your Favorite Drying Towel For The Ultimate Drying Combo
• Perfect Microfiber Materials + Perfect Border = A New Definition of the Perfect Drying Tool for all Automotive, Boat, and RV Applications!

Welcome to The Rag Company’s newest creation – The SMITTEN DRYING MITT.  This unique tool was designed by the TRC team to eliminate towel drag when using a large drying towel on lower panels by combining two of the most effective premium Korean microfiber materials available anywhere for safely and effectively drying all types of paint / clearcoat.  On one side is the same world-class Twist Loop Weave material as our top-of-the-line TWISTRESS and TWIST & SHOUT Drying Towels and on the other side is a double layer of our famous PLUFFLE (Plush/Waffle) Drying Towels. To tie everything together we used our exclusive ButterSoft™ Microfiber Suede as the ultimate border for softness and absorbency.  The results are unparalleled in the high-end microfiber industry with no equal.

• WEATHER RESISTANT
• MULTI-PURPOSE; CAN BE USED ON THE INTERIOR AND EXTERIOR OF YOUR VEHICLE
• WATER BASED LOW ENVIRONMENTAL IMPACT
• NON-GREASY FINISH
• PROTECTS AND SHINES
• REPELS WATER

Classic Protectant is our emulsified blend of silicones that adds gloss and not only protects, but revives faded plastics. Once dry, this product is weather resistant and offers protection and strong gloss enhancement to exterior plastics, tyres and interior plastics and leather. Classic Protectant is easy to use and was designed to be used neat, however it can be diluted to lower the glossy finish to suit the individual.

Directions -Tyres and engine bay:

1. Spray a light most onto tyres/engine bay.

2. Allow to cure until almost dry.

3. Smooth and even product with a foam applicator.

Directions -Exterior plastic trim:

1. Apply a small amount to a foam applicator and work into plastic areas.

2. Allow to cure until almost dry.

3. Buff with a clean Microfibre cloth to ensure even coverage.

Gregs thoughts:

"At ValetPRO we like to make versatile products and Classic Protectant is exactly that. Classic Protectant will protect and add shine to tyres, plastic, engine bays and interior vinyl with minimal fuss and maximum effectiveness. It’s also great for breathing new life into faded plastic trim." -Managing Director

• HIGH PERFORMANCE PH NEUTRAL SNOW FOAM
• CLINGS TO THE PAINTWORK EXCEPTIONALLY WELL & EFFECTIVE AT LOOSENING DIRT AND ROAD GRIME
• LUXURIOUSLY THICK FOAM
• WAX SAFE FORMULATION

Foamula 1 is a high-performance pH neutral snow foam that provides true versatility to any vehicle prewash. The concentrated formula provides an ultra-thick foam while still giving fantastic cleaning power at lower dilutions. It can be used with a foam lance or pump sprayer and gives off a pleasant apple fragrance during use. This wax safe product will provide impressive cling giving it ample time to encapsulate dirt and grime on the vehicle surface to allow easy removal during the rinse the stage.

Directions:

1) Add 300ml of snow foam and 700ml of water to a 1L foam lance bottle.

2) Adjust the feed rate to suit the level of foam required for the job at hand.

3) Foam the entire exterior of the vehicle, including the wheels, glass and trim.

4) Allow to dwell for five minutes, then rinse off thoroughly with a pressure washer.

Alternative pump spray dilution: 1:5 (heavily soiled wheels) to 1:20 (light dirt) depending on the task at hand. Agitate if required, then rinse thoroughly.

Please note: Do not allow the product to dry on paintwork. Avoid using in direct sunlight if possible.

Gregs thoughts:

"Snow foams are essential in ensuring the shampoo stage of your wash does not lead to excessive scratching from any road or traffic film that may be on the vehicle. Foamula 1 is specially formulated to provide strong clinging performance allowing for the foam to have plenty of time to loosen dirt from your vehicle’s exterior. This has quickly become my go-to snow foam during the winter months."

• POWERFUL YET GENTLE CAR SHAMPOO THAT RINSES OFF EASILY
• LEAVES A HIGH GLOSS, WATER REPELLING FINISH
• IMPROVES DRYING TIME
• PROLONG WAXES AND PAINT SEALANT LIFE BY ADDING A SACRIFICIAL, HIGH GLOSS COATING
• WASH SPONGE OR HAND MITT WILL GLIDE OVER PAINT WORK

Advanced Poseidon Car Wash uses a special blend of anionic surfactants and polymers to remove dirt with ease whilst leaving a protective gloss enhancing  film behind when rinsed off. This sacrificial layer allows for a clean finish whilst prolonging the protection of your wax or sealant.

Directions:

1. Dilute 30ml:5L of water in a bucket.

2. Working from the top down, apply to a wet vehicle with a  Advanced Microfibre Wash Mitt.

3. Wash entire vehicle.

4. Rinse off the vehicle, working from the top down.

5. Dry the vehicle using a Drying Towel.

Gregs thoughts:

"Thank you for your interest in Advanced Poseidon Car Wash. We are over the moon with this product’s performance having eliminated some of the drawbacks associated with traditional wash and wax products, like weak cleaning ability.  We have created a powerful but gentle car shampoo that’s designed to maintain your car wax or paint sealant, proving a glossy protective barrier. This is our finest and best car shampoo we have ever made." -Managing Director

The NEW & IMPROVED IRON RAIN v3 Fallout Remover.

This is a highly advanced premium fallout remover that removes sintered iron particles and ferrous contamination from exterior vehicle surfaces

IRON RAIN v3 is a completely new formula that has a more pleasant berry fragrance added. 

And apart from the colour indicator that turns the product purple when activated with iron contamination we have a new added colour indicator. Over a period of time most chemicals will need to be shaken before use to make sure the active ingredients are mixed. With IRON RAIN v3 this becomes evident when the product will change to a shade of orange over a few days. This indicates it needs to be shaken before use. One quick shake and IRON RAIN v3 will turn green again indicating it is ready for use.

IRON RAIN v3 has also been made slightly thicker whilst still being sprayable. This makes it easier to use and remain active for longer. 

IRON RAIN v3 is probably the most advanced Fallout Removal product of its type on the market.

BLIZZARD pH Neutral Snow Foam is a premium high powered and highly concentrated foam wash which gives the cleaning power of alkaline cleaners but at a neutral pH. Safe on all exterior surfaces. 

We have had this developed specifically for us after trying various other brands and not being entirely satisfied with what was available.

'BLIZZARD' offers....

Excellent economy due to high dilution rates...we use approx 50ml of product to produce 'high foam' on a medium to large vehicle. This would give approx 20 washes from a 1 Litre bottle at these ratios and 100 washes from 5 Litres.

Excellent cleaning power even from a pH neutral product allowing less contact with vehicle paintwork and reducing the potential for 'paint marring'

Recommended for use through a 'foam lance'. However it can also be used as an excellent 'pre-wash' through a pump sprayer but without the foaming effect.

• UNIQUELY DESIGNED TO BE USED WITH A FOAM LANCE

• PROVIDES A HIGH GLOSS FINISH TO YOUR VEHICLE

• PROVIDES HYDROPHOBIC PROTECTION FOR IMPRESSIVE WATER BEADING

• EXCEPTIONALLY EASY TO APPLY AND RINSE OFF

• PH NEUTRAL FORMULATION

ValetPRO Snow Seal is a specially formulated coating to be used with a foam lance and pressure washer. Snow Seal awards your vehicle with a durable hydrophobic coating that leads to remarkable water beading. Application could not be easier– simply spray on a clean vehicle at the specified dilution, rinse off and then dry. Snow Seal will also leave an impressive glossy finish.

Directions:

1) Before application, ensure the vehicle is out of direct sunlight and paintwork is clean and cool to the touch.

2) Dilute in a clean foam lance bottle. 50ml product: 250ml water.

3) Apply to the vehicle. Take care to avoid the windscreen.

4) Rinse the vehicle with a pressure washer. Do not allow product to dry.

5) Dry the vehicle with a ValetPRO Drying Towel.

6) Clean the windscreen and wiper blades with Glass Cleaner to avoid potential smearing.

Please note: No cure time or agitation required. Do not exceed dilution ratio. Not suitable for use on convertible vehicles.

Greg's thoughts:

"Snow Seal is the perfect accompaniment to anyone who uses a pressure washer and foam lance as a part of their car detailing process. Ideal for the wintertime or those in an outdoor setting, Snow Seal saves time and effort to your car protection step."

• REMOVES TAR AND GLUE FROM HARD AND PAINTED SURFACES
• MILD BUT EFFECTIVE SOLVENT
• REFINED ALIPHATIC SOLVENT BOOSTED WITH NATURAL CITRUS OIL

Citrus Tar and Glue Remover does exactly what the name describes; it was designed to shift sticky substances from hard and painted surfaces. It’s a refined aliphatic solvent boosted with natural citrus oils, designed to be mild but highly effective in turning tar and glue soluble. This product was designed to be used neat and makes for a gentle tar and glue remover.

Directions:

1. Spray onto affected area, working a panel at a time. Always use on a dry surface.

2. Allow to dwell until tar begins to run.

3. Prime a microfiber cloth with product.

4. Wipe off treated area.

5. Repeat until the contamination is removed.

6. Rinse down the paintwork with water to neutralise the solvents.

Please note: If the vehicle has been repainted or had a SMART repair carry out a spot test on an inconspicuous area.

Gregs thoughts:

"Many trade specific products can be quite unpleasant to use and tar and glue removers are right up there with the worst culprits. Our aim with Citrus Tar And Glue Remover was to create a product that was simple yet still effective. Using natural citrus oil ValetPRO’s Citrus Tar and Glue remover works brilliantly." -Managing Director

servFaces Tyre & Rubber Care

Tyre & Rubber Care provides an even deep black finish on tyre walls and other diverse rubber surfaces. Tyre & Rubber Care is a maintenance and coating emulsion. The product replenishes the moisture of the rubber surface and effectively protects it against scarring and cracking.

Advantages:
– Good water repelling characteristics
– Deep enriched colour
– Quick and easy to use
– Minimal amount of product required for good results
– Does not leave behind an oily or sticky film on the surface
– Free from Silicone
– Free from solvents

Service Life:
Tyre & Rubber Care provides surface protection for a period of 3 – 6 weeks. Note: continuous exposure to rain will reduce the service life.

Application:
Lightly spray the clean surface with the product. Then with a sponge work the product into the surface and leave to dry.

Do not apply the product or leave to dry in direct sunlight.

Usage: 3 – 5 ml / m²
Application Temperature: +5°C to +30°C
Storage and Shelf Life: at least 12 months at room temperature sealed in its original container.
Storage Temperature: +10°C to +25°C

servFaces Special Glass Cleaner (High-Concentrate)

servFaces Special Glass Cleaner is a modern and highly concentrated glass cleaner, which is gentle on glass material and provides a streak-free result. The product is also suitable for use on plastic surfaces. The product can be used universally and effortlessly to remove nicotine, grease and oil.

Application Areas:
– Glass facades
– Windows
– Windscreens
– Plastic windows
– Window frames
– Glass tables
– Mirrors
– Acrylic glass

Characteristics:
– Free from Silicone
– Environmentally friendly
– Streak-free cleaning
– Highly concentrated
– Strong cleaning performance
– Economic cleaning, less resources

Application:
Spray the surface with Special Glass Cleaner and using a microfiber cloth remove the dirt. Stubborn dirt can be removed by allowing the Special Glass Cleaner to soak for a while; this will make the cleaning easier.

Dilution:
The product can be diluted in the ratio of 1:10 min. to 1:100 max. depending on the level of contamination.
(Recommendation: 35 – 50ml / 1 Litre of distilled water)

Application Temperature: +10°C to +30°C
Storage and Shelf Life: at least 12 months at room temperature sealed in its original container.
Storage Temperature: +10°C to +25°C

servFaces Natural Hybrid Wax

Natural Hybrid Wax is a specially developed hybrid hard wax based on high-quality carnauba wax (38%). The product is bound with hybrid polymers (62%) and provides protection for painted surfaces on vehicles, caravans and yacht exterior surfaces. This product is very easy and quick to apply and provides excellent results and very good hydrophobicity.

The product binds directly to the surface molecules improving the dirt-repelling characteristics of the surface and forms a very thin water repellent protective layer. To achieve best results, the surface to be treated should be cool and dry.

The surface must be clean prior to product application; servFaces recommends Surface Cleaner Ultima & Surface Cleaner Neutra to achieve a pure and neutral surface prior to product application.

Natural Hybrid Wax deepens the shine and the colour depth of the surface. The product can also be used for aftercare maintenance of vehicles, which are already sealed with our wax protection system. Thus extending the service life of the coating.

Advantages:
– Very good hydrophobic characteristics
– Enhances the gloss finish and surface smoothness
– Resistant against weak acids and bases
– Quick and easy to use
– Minimal amount of product required for excellent results
– Ideal for everyday use vehicles
– Free from Silicone

Service Life:
Natural Hybrid Wax provides surface protection for a period of 6 – 12 months. Should a higher level of protection be required, then after 120 minutes an additional coat can be applied.

Application:
Apply the product thinly and evenly to the surface using the servFaces Wax-Applicator; a visible closed film is created on the surface. Leave the product approximately 20 – 60 minutes to evaporate. Then using the servFaces Premium Soft Towel buff the surface to a high gloss and smear free result. Any excess product or fine smears can be removed using a clean microfiber cloth.

Do not apply the product or leave to dry in direct sunlight.

Usage: 10 – 15g / Vehicle
Application Temperature: +5°C to +35°C
Curing Time: Dry / Weatherproof after approximately 4 – 6 hours, full protection after approximately 24 hours
Storage and Shelf Life: at least 12 months at room temperature sealed in its original container.
Storage Temperature: +10°C to +25°C

servFaces Hydro Seal

Hydro Seal is a specially developed silicone free spray coating for
all as-new smooth external surfaces, such as paint, plastic and glass
found on vehicles, caravans and yachts. This product is very easy
and quick to apply and provides excellent results and a high hydrophobic effect.

The product binds directly to the surface molecules improving the dirt-repelling characteristics of the surface and forms a very thin water repellent protective layer. The product can be applied on dry and wet (minimally reduces the product performance) surfaces. To achieve best results, the surface to be treated should be cool and dry.

Hydro Seal deepens the shine and the colour depth of the surface. The product can also be used for after care maintenance of vehicles, which are already sealed with our surface protection systems. Thus extending the service life of the coating.

Advantages:
• Extreme hydrophobing and smoothness
• Enhances the gloss fi nish and surface smoothness
• Resistant against weak acids and bases
• Quick and easy to use
• Minimal amount of product required for excellent results
• Free from Silicone

Service Life:
Hydro Seal provides surface protection for a period of 6–8 weeks. Should a higher level of protection be required, then after 60 minutes an additional coat can be applied.

Application:
Lightly spray the product onto the surface to be treated and then using the servFaces Premium Soft Towel buff the surface to a high gloss and smear free result. Any excess product or fine smears can be removed using a clean microfiber cloth (Premium Soft Towel).

Do not apply the product or leave to dry in direct sunlight.

Usage: 3 – 5ml / m²
Application Temperature: +5°C to +30°C
Storage and Shelf Life: at least 12 months at room temperature sealed in its original container.
Storage Temperature: +10°C to +25°C

servFaces Glass Cleaner (Ready-to-Use)

servFaces Glass Cleaner is a modern and read-to-use cleaning product, which is gentle on glass material and provides a streak-free result. The product is also suitable for use on plastic surfaces. The product can be used universally and effortlessly to remove nicotine, grease and oil.

Application Areas:
– Glass facades and windows
– Windscreens
– Plastic windows
– Window frames
– Glass tables and Mirrors

Characteristics:
– Free from Silicone
– Environmentally friendly
– Streak-free cleaning
– Highly concentrated
– Strong cleaning performance
– Economic cleaning, less resources

Application:
Spray the surface with Glass Cleaner and using a microfiber cloth remove the dirt. Stubborn dirt can be removed by allowing the Glass Cleaner to soak for a while; this will make the cleaning easier.
Recommendation: for an optimal result use servFaces Glass Cleaning Towels.

Do not apply the product or leave to dry in direct sunlight.

Usage: 5 – 10 ml / m²
Application Temperature: +5°C to +30°C
Storage and Shelf Life: at least 12 months at room temperature sealed in its original container.
Storage Temperature: +10°C to +25°C

servFaces Fast Shine

Fast Shine is a specially developed silicone free spray coating for all as-new smooth external surfaces, such as paint, plastic and glass found on vehicles, caravans and yachts. This product is very easy and quick to apply and provides excellent results.

The product binds directly to the surface molecules improving the dirt-repelling characteristics of the surface and forms a very thin water repellent protective layer. The product can be applied on dry and wet (minimally reduces the product performance) surfaces. To achieve best results, the surface to be treated should be cool and dry.

Ideal for the care of exhibition vehicles and exhibits.

Advantages:
– Hydrophobic characteristics
– Enhances the gloss finish and surface smoothness
– Resistant against weak acids and bases
– Quick and easy to use
– Minimal amount of product required for excellent results
– Free from Silicone

Service Life:
Fast Shine provides surface protection for a period of 3 – 6 weeks. Should a higher level of protection be required, then after 60 minutes an additional coat can be applied.

Application:
Lightly spray the product onto the surface to be treated and then using the servFaces Premium Soft Towel buff the surface to a high gloss and smear free result. Any excess product or fine smears can be removed using a clean microfiber cloth.

Do not apply the product or leave to dry in direct sunlight.

Usage: 3 – 15ml / m²
Application Temperature: +5°C to +30°C
Storage and Shelf Life: at least 12 months at room temperature sealed in its original container.
Storage Temperature: +10°C to +25°C

servFaces Care Seal

Care Seal is a specially developed quick sealing product for all smooth surfaces such as paint, plastics and glass in automobiles, caravans and boats. The very simple and quick application guarantees the best finishing result.
The product binds directly to the surface molecules improving the dirt-repelling characteristics of the surface and forms a very thin water repellent protective layer. The product can be applied on dry and wet surfaces. For best results, the surface to be treated should be cool and dry.
Care Seal deepens the shine and the colour depth of the surface. The product can also be used for aftercare maintenance of vehicles, which are already sealed with our surface protection systems. Thus extending the service life of the coating.

Service Life:
Care Seal provides surface protection for a period of 10 – 14 weeks. Should a higher level of protection be required, then after 30 minutes an additional coat can be applied.

Application:
Spray the product onto a microfiber cloth and evenly apply to the clean and cool surface until it is barely visible. Remove excess product and light streaks using a clean microfiber cloth.

Do not apply the product or leave to dry in direct sunlight.

Suitable Microfiber Towels: servFaces Allround Towels & Premium Soft Towels
Usage: 3 – 5 ml / m²
Application Temperature: +5°C to +30°C
Storage and Shelf Life: at least 12 months at room temperature sealed in its original container.
Storage Temperature: +10°C to +25°C

• Size:- 20 x 40 Inches (50cm x 100cm)
• Colors:- Platinum Grey
• Blend:- 70% Polyester / 30% Polyamide Material
• Weight:- 490 GSM (Grams per Square Meter)
• Border / Edging:- Platimum ButterSoft Suede Edge
• Material:-100% Korean Split Microfiber (Circular Knit Weave)
• Country of Origin:- South Korea

Recommended Uses:-

• Drying
• Wax, Compound, Sealant, Glaze, and Polish Removal
• Waterless Wash
• Instant Detailer
• Spray Waxes
• Buffing; Final Buff / Touch-Up

Introducing one of the most unique high-quality detailing towels ever produced – The PLATINUM PLUFFLE, exclusively by The Rag Company.  It’s half-plush / half-waffle construction, also known as Hybrid Weave, creates an ultra-wicking action unlike any towel we have ever tested against (including our competitor’s highest-quality plush and waffle-weave towels).  Silky soft premium plush Korean 70/30 blend fibres separated by waffle divots create a level of absorbency previously only imagined.  Add TRC’s exclusive world-class ButterSoft™ 70/30 Suede border and the PLATINUM PLUFFLE is truly in a league of its own.  PLATINUM PLUFFLE – the newest addition to The Rag Company’s signature lineup of super plush microfiber towels and the #1 selling choice of numerous Automobile Manufacturers, Collector Car Clubs, Professional Restorers, and Detailers everywhere!

Platinum Pluffle Additional Product Details:-

• Designed to dry all vehicle surfaces faster, more thoroughly and more gently than conventional towels

• The medium nap allows you to use confidently with all quality detailing sprays, waxes, and polishes – your final buff never looked so good!

• Quickly wicks away moisture, safely drawing it away from the surface into the fibers of the towel

• Extra soft and absorbent / quick drying between uses

• Suggested uses: wax, compound, sealant, glaze, and polish removal; waterless wash, instant detailer, spray waxes, buffing; final buff / touch-up; drying touch-up (small area)

• Lint-free / non-abrasive

• No tags = no scratches

• Made with the highest quality Korean microfiber preferred by auto enthusiasts.  (don’t be fooled by cheap imitations from elsewhere with lower weights that most of our competitors offer as “high quality” – proven over and over that they just can’t compare)

• Meets and exceeds the toughest detailer standards

• Extremely durable – ability to withstand hundreds of washings getting softer each time

• Manufactured in South Korea on the highest quality German microfiber production equipment (Karl Mayer)

CARE INSTRUCTIONS: Machine wash with mild liquid detergent (free of dyes, fragrances, bleach and softeners). Tumble dry low, and DO NOT iron. DO NOT use any fabric softener as this clogs the microfibers and reduces performance. Do not use chlorine bleach. Wash only with other non-linting materials (no cotton!) to maintain proper dirt-gripping properties. 
Always wash new microfiber towels prior to first use.
Always wash newer black, orange, red and other dark colored towels separately from lighter colored towels to mitigate the risk of dye bleeding.

THE RAG COMPANY DIFFERENCE SINCE 1999:  

• ALWAYS START WITH THE BEST MICROFIBER YARN AVAILABLE – Think of it similar to only using the freshest ingredients in your cooking. This helps lay the foundation for towels that are consistently soft, extremely durable and of the highest quality for the job

• TOWELS WITH HUNDREDS OF THOUSANDS OF 100% SPLIT MICROFIBERS PER SQUARE INCH – Not all towels are created equally. THE RAG COMPANY manufactures against very strict requirements resulting in towels with the highest ratings and most effective terry-style microfiber products available. With hundreds of thousands of fibers per square inch, our all-purpose towels can safely and effectively make even the toughest jobs a breeze

• THE HIGHEST ABSORBANCY – Microfiber towels that absorb seven to ten times their weight in liquid and matter to quickly pull away everything that’s in your way
• PRE-WASHED DARK COLORED TOWELS – 99% of our competitors don’t take the additional precautions necessary to reduce potential bleeding issues typically found with dark colored towels. THE RAG COMPANY makes this a standard feature of every all-purpose terry towel we sell.