We've all seen those before and after pictures of cars that have been professionally detailed and now sport a mirror finish with a deep lustre and shine. Take the first step in your pursuit of these same results with Meguiars range of pads for dual action (DA) polishers and see for yourself how easy a professional shine is achieved. Whether cutting, polishing or buffing their range of foam discs will give you the finish that goes beyond anything a tub of polish and hours of wax on wax off provide. All Meguiar's foam discs have been engineered with improved foam technology that eliminates minor surface defects while restoring gloss with no swirls. Their reusable hook and loop system holds the pads firmly in place as you work and with them all being machine washable means you can throw them in the wash and easily clean them for the next project. Perfect for paint defect removal, paint correction and polishing and waxing, using a dual action polisher with both a rotational and orbital action will deliver fast effective results.

Microfiber disc technology cuts through severe to moderate surface defects with no swirls
Engineered for increased cutting efficiency
Machine washable and reusable

Ultra Fine Car Care

Meguiars DA 3 Inch Microfiber Cutting Disc 2 Pack - DMC3

$34.00 $28.00

Get that professional finish with a range of Meguiar's dual action polishing discs

Microfiber disc technology cuts through severe to moderate surface defects with no swirls
Engineered for increased cutting efficiency
Machine washable and reusable

Sonax

Sonax Profiline Perfect Finish

$130.00 $124.00

SONAX Perfect Finish (One Step Polish)

Silicone free finishing polish for professionally polishing of sanded down paintwork, or paintwork pre-polished with polishing machine and abrasive polish. Specially developed for paintshops and detailers for One-Step polishing of sanded down paint due to paintwork damage such as dust occlusion or paint runs. The special nano-abrasives enable effective scratch removal with optimum shine and without inducing holograms or buff marks on the paintwork.

Cut: 4 out of 6
Gloss: 6 out of 6

REMOVES PAINT DEFECTS - Sonax Perfect Finish polishes and removes scratches, sanded paint defects such as dust inclusions, paint runs, and water spots in a single step - No wet sanding or compounding is necessary before use
HIGH GLOSS FINISH - Silicone free polishing formula leaves a OEM high gloss paint finish with hologram-free paint surface
FLEXIBLE - One of the most flexible compound / polishes available in the market that works beautifully on all clear coats and paint finishes
SAVE TIME - The single step process makes paint corrections far less labour intensive and time consuming. Our diminishing abrasive technology will provide up to P2000 sanding scratch removal and finish out to a OEM shine
Removes marks of P2000 grit or finer, recommend applying with a rotary polisher or DA with Medium cut Polishing pad.

Directions for Use:

Shake bottle/tube before use.
Deep scratches or paintwork damage should first be wet sanded .with abrasive paper P2000, or finer.
Product to be worked in with a rotational speed regulated polishing machine.
Apply a little of the product directly to the sanded spot.
Polish the area at the lowest rotational speed (ca. 800 rpm) with the green Polishing pad (493 000) for 10 sec. Tilt the machine a little bit.
Afterwards, increase to medium rotational speed and allow the machine to run, now exerting only moderate pressure.
Guide it swiftly over the surface to avoid heat developing beneath the polishing pad.
Remove polish residue with a microfiber cloth.

Please Note: To achieve a hologram-free finish on darker paintwork, finish polishing with a foam pad may be necessary.