pH Neutral Snow Foam is our high foaming pre wash. It produces a thick foam that clings to the paint surface to enable the cleaner to penetrate grime for a deep clean.
PRODUCES THICK AND CLINGY FOAM
SAFE ON ALL SURFACES AND FINISHES
WILL NOT STRIP WAXES OR PROTECTIVE COATINGS
PH NEUTRAL FORMULA
GOOD VALUE FOR MONEY
pH Neutral Snow Foam is our high foaming pre wash. It produces a thick foam that clings to the paint surface to enable the cleaner to penetrate grime for a deep clean. This means less work to remove the excess grime and prepares the car for shampooing. This product was designed to work on well waxed surfaces, and the pH neutral formula is an added bonus because it means that this product is safe to use on any surface.
Directions:
1. Dilute. Foam lance: 1:3 / Pump Spray: 1:20.
2. Foam the entire vehicle.
3. Leave to dwell but not dry out.
4. Starting from the bottom, rinse off with a pressure washer.
Please note:this product can freeze at 5 degrees. To correct, place in a bucket of warm water until consistency returns to normal.
Valetpro
ValetPRO Foamula 1 Snow Foam - 1L
Regular price$27.95
HIGH PERFORMANCE PH NEUTRAL SNOW FOAM
CLINGS TO THE PAINTWORK EXCEPTIONALLY WELL & EFFECTIVE AT LOOSENING DIRT AND ROAD GRIME
LUXURIOUSLY THICK FOAM
(COVID 19 DISINFECTANT)
WAX SAFE FORMULATION
Foamula 1 is a high-performance pH neutral snow foam that provides true versatility to any vehicle prewash. The concentrated formula provides an ultra-thick foam while still giving fantastic cleaning power at lower dilutions. It can be used with a foam lance or pump sprayer and gives off a pleasant apple fragrance during use. This wax safe product will provide impressive cling giving it ample time to encapsulate dirt and grime on the vehicle surface to allow easy removal during the rinse the stage.
Directions:
1) Add 300ml of snow foam and 700ml of water to a 1L foam lance bottle.
2) Adjust the feed rate to suit the level of foam required for the job at hand.
3) Foam the entire exterior of the vehicle, including the wheels, glass and trim.
4) Allow to dwell for five minutes, then rinse off thoroughly with a pressure washer.
Alternative pump spray dilution: 1:5 (heavily soiled wheels) to 1:20 (light dirt) depending on the task at hand. Agitate if required, then rinse thoroughly.
Please note:Do not allow the product to dry on paintwork. Avoid using in direct sunlight if possible.
Gregs thoughts:
"Snow foams are essential in ensuring the shampoo stage of your wash does not lead to excessive scratching from any road or traffic film that may be on the vehicle. Foamula 1 is specially formulated to provide strong clinging performance allowing for the foam to have plenty of time to loosen dirt from your vehicle’s exterior. This has quickly become my go-to snow foam during the winter months."
Advanced Neutral Snow Foam is one of our high foaming pre washes that is used to remove traffic film and other grimes prior to shampooing a car. When used with a pressure washer this product produces a thick foam that allows it to sit on the surface and encapsulate the grime, lifting it from the paint surface and carrying it with the foam when it’s rinsed off.
This product has a pH neutral formula which makes it safe for all surfaces by eliminating the chances of corrosion.
Not only does this product have a dilution rate of 1:20 which means value for your money, but it lifts the dirt from the surface prior to shampooing, reducing the risk of scratching the paintwork.
Directions:
1. Dilute. Foam Lance 1:3 / Pump Spray 1:20.
2. Foam the entire vehicle.
3. Leave to dwell but not dry out.
4. Starting from the bottom, rinse off with a pressure washer.
Gregs thoughts:
"I want to thank you for your interest in Advanced Neutral Snow Foam; a product with all the power of an alkaline cleaner minus the harsh side effects. Our highly concentrated formula gives a professional finish and allows you to clean everything from paint work and wheels to engine bays without fear of damage." - Managing Director
Valetpro
ValetPro Snow Seal - 500ml
Regular price$24.90
UNIQUELY DESIGNED TO BE USED WITH A FOAM LANCE
PROVIDES A HIGH GLOSS FINISH TO YOUR VEHICLE
PROVIDES HYDROPHOBIC PROTECTION FOR IMPRESSIVE WATER BEADING
EXCEPTIONALLY EASY TO APPLY AND RINSE OFF
PH NEUTRAL FORMULATION
ValetPRO Snow Seal is a specially formulated coating to be used with a foam lance and pressure washer. Snow Seal awards your vehicle with a durable hydrophobic coating that leads to remarkable water beading. Application could not be easier– simply spray on a clean vehicle at the specified dilution, rinse off and then dry. Snow Seal will also leave an impressive glossy finish.
Directions:
1) Before application, ensure the vehicle is out of direct sunlight and paintwork is clean and cool to the touch.
2) Dilute in a clean foam lance bottle. 50ml product: 250ml water.
3) Apply to the vehicle. Take care to avoid the windscreen.
4) Rinse the vehicle with a pressure washer. Do not allow product to dry.
6) Clean the windscreen and wiper blades withGlass Cleaner to avoid potential smearing.
Please note: No cure time or agitation required. Do not exceed dilution ratio. Not suitable for use on convertible vehicles.
Greg's thoughts:
"Snow Seal is the perfect accompaniment to anyone who uses a pressure washer and foam lance as a part of their car detailing process. Ideal for the wintertime or those in an outdoor setting, Snow Seal saves time and effort to your car protection step."
